---
product_id: 2058191
title: "Netduino Plus 2"
brand: "secret labs"
price: "Q27"
currency: GTQ
in_stock: false
reviews_count: 5
url: https://guatemala.desertcart.com/products/2058191-netduino-plus-2
store_origin: GT
region: Guatemala
---

# 168MHz Speed 384KB Storage 100+ KB RAM Netduino Plus 2

**Brand:** secret labs
**Price:** Q27
**Availability:** ❌ Out of Stock

## Summary

> 🚀 Elevate Your Projects with Netduino Plus 2!

## Quick Answers

- **What is this?** Netduino Plus 2 by secret labs
- **How much does it cost?** Q27 with free shipping
- **Is it available?** Currently out of stock
- **Where can I buy it?** [guatemala.desertcart.com](https://guatemala.desertcart.com/products/2058191-netduino-plus-2)

## Best For

- secret labs enthusiasts

## Why This Product

- Trusted secret labs brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Limited Time Offer:** Get a MicroUSB cable included to kickstart your projects!
- • **Seamless Integration:** Effortlessly connect with 3rd-party accessories for enhanced functionality.
- • **Unleash Your Creativity:** Transform ideas into reality with 22 GPIOs and versatile connectivity options.
- • **MicroSD & Ethernet Ready:** Expand your projects with MicroSD storage and robust Ethernet IP networking.
- • **High-Level Coding Made Easy:** Utilize the .NET Micro Framework for a smooth coding experience.

## Overview

The Netduino Plus 2 is a powerful microcontroller featuring a 168MHz Cortex-M4 MCU, 384KB of code storage, and over 100KB of available RAM. With 22 GPIOs, multiple communication protocols, and support for MicroSD and Ethernet, it’s designed for both hobbyists and professionals looking to create innovative projects with ease.

## Description

Netduino Plus 2Netduino is an open source electronics platform using the .NET Micro Framework. It features a 32-bit microcontroller, a rich development environment, and is suitable for engineers and hobbyists alike. Input/Output interface with

## Features

- 168MHz Cortex-M4 MCU. 384KB Code Storage. 100+ KB Available RAM.
- Netduino Plus 2 offers 22 GPIOs combined with SPI, I2C, 4 UARTs (1 RTS/CTS), 6 PWM channels and 6 12-bit ADC channels. Plus MicroSD storage and Ethernet IP networking.
- .NET Micro Framework combines the ease of high-level coding and the raw features of microcontrollers.
- 3rd-party accessories offer pre-built functionality like GPS location, servo control and battery power.
- Design files and source code are included. MicroUSB cable included for a limited time.

## Images

![Netduino Plus 2 - Image 1](https://m.media-amazon.com/images/I/81ziA6eqe2L.jpg)
![Netduino Plus 2 - Image 2](https://m.media-amazon.com/images/I/81mEC9ghZOL.jpg)
![Netduino Plus 2 - Image 3](https://m.media-amazon.com/images/I/71OObydk4oL.jpg)

## Customer Reviews

### ⭐⭐⭐⭐⭐ 5.0 out of 5 stars







  
  
    It's a beast! Same price range as Arduino with ethernet
  

*by J***Y on Reviewed in the United States on February 4, 2015*

All the things we love about Arduino, with much more power, and a MUCH MUCH better development environment. Multi-threading, tons of ram, proc power, etc. Also the GPIO pins are 3.3v while also being 5v tolerant. That makes for great power savings (less battery swapping) while making it much easier to hook devices up to it. Got a mix of 3.3v and 5v sensors you want to hook up? not an issue. No voltage dividers needed.Also, When you compare the price of this board to an Arduino with an ethernet shield, or an ethernet version of the Arduino, the price is about the same. The catch is that with the Arduinos you lose some of the GPIO pins to running the ethernet. The Netduino does not have that problem.

### ⭐⭐⭐⭐⭐ 5.0 out of 5 stars







  
  
    It rocks!
  

*by W***L on Reviewed in the United States on May 22, 2013*

I love the performance and the built in Ethernet. I am programming for it to communicate with a Windows PC, so being able to use the same development environment is fantastic. I also like the ability to have debug capability. There is lag in looking at variables, etc (especially large classes or lists/arrays) across the USB, but that is to be expected. The fact that you can look at all save a bunch of work putting in and taking out print statements. Setting it up to work with VS 2012 was not plug and play, but not that hard.

### ⭐⭐⭐⭐ 4.0 out of 5 stars







  
  
    (!Net)duinoPlus2 = Bare-Metal Power House
  

*by D***. on Reviewed in the United States on June 8, 2015*

I titled this (!Net)duinoPlus2 because my first order of business was to nuke the .Net framework and setup a bare metal library for it.I have been working on a midi interrupter project for a Tesla Coil and was previously using around 20+ Arduino ProMini boards with the ATmega328P micro, running in parallel -- mainly to have enough timer compare channels.But recently I wanted to super-size that with even more capabilities and rather than double or triple the number of processors needed, I opted to use a low-end Xilinx Spartan-6 FPGA to do the timer compares and feed it with a single microprocessor.  A single FPGA board (available from Numato Labs here on Amazon for around $40) was capable of doing the timer compare logic of over 85 of the ProMini boards and at 6.25 times the timer clock speed, and just needed to be paired with a micro to feed it.Initially for the single micro feeding the FPGA, I tried an Arduino Uno, since I had a couple on hand and the code could run with very few modifications from what I had on the ProMini boards, plus it has readily available proto-shields and such for building the interfaces. But I quickly realized the Uno was falling way short of processing power to even simply push the data to the FPGA fast enough.So I needed a solution in the same basic footprint, only with more processing power.  Even the other Arduino variants, while better, still wouldn't have been fast enough.  Then I found this little board.  PERFECT!  But, I didn't want all of the overhead of the .Net framework plus didn't want to rewrite all of my code from C/C++ into C#.  So the first thing I did was to take the .net framework source code and extract the basic hardware abstraction and peripheral access layers that were already tailored to this board (i.e. basic GPIO setup, clock initialization, SPI and USART transceiver logic, etc), and made a static-link library that would let me use this board as a bare-metal target.While it took me a couple of weeks to rework the framework into just a HAL/PAL library (of which I'm still working on), once I had enough of that done, it took me all of about 10 minutes to port my Arduino Uno/ProMini code to this micro.  I simply deleted all of the Arduino specific low-level port setup code and replaced function calls for things like USART init and SPI I/O port write functions with calls to the HAL/PAL functions for this processor.The resulting code, even with modest C Runtime overhead (was using "newlib"), was only around 34K in total size -- and this micro has 1Meg of flash!  (BTW, the similar code on the ATmega was nearly 20K.)  This processor is a real power house.  It has to be, or it couldn't run the .net framework in the first place (which is a huge overhead).  I can't speak to its performance with it running the .net framework, but if you want to use it for bare metal programming, it's fantastic and is quite the powerhouse of a processor.I do wish it would have come with the GoPort soldered on for the JTAG.  Not that it was difficult to solder on, but was one more setup step needed to get an in-system debugger up and running.  For debugging, the ST-Link/V2 works well running with openocd (I only use Linux, BTW).  I tried numerous debugger front-ends with it.  KDbg worked, but had difficulties following the source tree well.  And DDD kept crashing on me.  But the best in-system debugger for it, hands down, is Eclipse.  I use QtCreator for my IDE and normally it does an excellent job with debugging, but strangely I could never get it to work with the GDB from the arm-eabi cross-compiler.  I think it was related to the Python scripting, which Creator needed, but Eclipse didn't -- even after rebuilding GDB and adding Python scripting support it still wouldn't work.With Eclipse and the ST-Link/V2, you can easily single step through your code and quickly debug issues.  I had some linker script problems with the C-Runtime and the .init section and its running of static constructors that was causing it to hard fault during the bootup process.  Having a good in-system debugger was very valuable and it worked well to track that down.While you can use the JTAG port for programming, for general programming during development, the DFU (direct firmware update) utility in conjunction with the ST bootloader (already programmed into this micro) works very nicely and is much more convenient.  Just install the dfuload utility (you'll likely need to compile the latest version from source, as the one with most Linux distros is old and quite buggy).  Then when you want to program it, hold down "the button" on this board and reset it, by either unplugging and replugging it on the USB or use a reset button on an attached shield.  That will boot ST's bootloader and you can launch dfuload to program it.Though this brings me to my main two complaints on this board -- 1) "the button" (which is really nice in its functional design) is mounted at an awkward location.  When you have a shield board plugged on top, it's really difficult to press it to switch it to bootloader mode.  I had to use a pen-cap (since it was plastic and wouldn't short anything out) to slide between the boards and fish around until I found the button.  and 2) there's no real "reset" button on the board.  Now, 99% of the Arduino shields have a reset button, so this isn't too major, but it would be nice to have a reset button on this board that can send a hardware level reset in addition to this button to select whether you want to go into bootloader or not.  i.e. it needs two buttons.But, these are both minor issues because once you have it programmed, except for development work, how often do you need to launch the bootloader?  And for the reset function, most shields have a reset button anyway.On the plus side, I REALLY like how the power to the header pins (as well as each on-board peripheral) is controllable via software.  Each has a dedicated transistor that lets you cycle power to any piece of it you wish and/or power down unused peripherals to save power.  This worked really well for my FPGA application because I can simply cycle power to the header pins and force a low-level reset of the FPGA to force it to reload from its bootflash without resetting the STM32 itself.  This also worked well during development and testing of the FPGA code -- no unplugging and replugging needed.The only real headache I encountered was in the interfacing of the FPGA to the STM32F405...  I was hoping since both run at 3.3v I wouldn't need any buffers or voltage shifters or anything.  I was using a SPI interface to communicate to the FPGA and even with extensive clock-domain synchronization logic, they still wouldn't communicate.  It turned out to be lots of noise on the signals coming from the STM32F405 on this board.Now, a lot of that was probably due to it still being on a prototype circuit with long wire runs that will go away when I do the final PCB turn.  But in any case, I had to use a buffer chip between them, when I really shouldn't have needed anything.  And yes, I tried every combination of pull-ups and pull-downs and pin configuration options and logic types, etc.  The only thing that resolved it was adding a buffer chip (like is used in voltage-level shifters) and then it communicated flawlessly.  And it was definitely noise and general lack of output drive from this board and not just a speed related issue, as I tried slowing down the SPI clock to a crawl and that made no difference whatsoever.So what I'm getting at there is that the I/O pins on this micro don't seem to have the same drive capabilities of the lower powered ATmega parts, etc, meaning you may have to consider your interfaces and connected devices more closely -- and it probably means that some shield boards may simply not work with this board without modification (not sure).All in all, for a board that has a common footprint with lots of stackable boards and accessories for prototyping and small project design, it's hard to beat this.  I couldn't find any better processor for the dollar in the same profile and footprint.  Though having said all of that, it's a pretty huge leap to go from bare-metal programming on an ATmega to bare-metal programming on a STM32.  So if you've never worked with manual port configuration, writing linker scripts, writing device driver code, etc, you should get your feet wet first on a smaller micro.Otherwise, I highly recommend this board.  The design was well thought out and I/O mapping is pretty optimal.  And even the interfaces back to the Arduino header, as it's mapped out to specific peripherals and certain I/O pins, was done well.Update: I forgot to mention ...  for the JTAG connector, you can search for "goport" here on Amazon and find it.  But spec-wise, it's a 10-pin (2x5) header connector with 0.050" center pins.  You can use shrouded or unshrouded.  The shrouded is nice because you have a key for plugging it correctly, but the unshrouded is much easier to connect/disconnect.If you are using the shrouded version, the open or key side goes inward toward the microprocessor.  There's a little teeny tiny white dot on the silkscreen marking pin 1, but at least on my board, that dot was literally on the apex of the corner of the silkscreen markings for the connector outline and impossible to see.  You can easily ohm it out to verify orientation.Also, for the ST-Link/V2, you'll need a micro (or mini or whatever they call it) JTAG (10-pin) to standard JTAG (20-pin) adapter.  Olimex has one.  Search for "Olimex ARM Micro JTAG adapter" here on Amazon and you'll find it.  It even comes with the little ribbon cable so all you have to do is plug it in.Update 2: I finally got around to interfacing this board with an I2C 20x4 LCD screen, and even though the I2C interface on the LCD is 5v and the I/O pins on the Netduino are 3.3v, since I2C is open-drain (and was configured as such), no voltage level shifter or buffer should have been required, as each device only has to pull the signals to ground and the Netduino's processor pins are 5v tolerant.  But after much frustration of trying to get it to work without a level-shifter or buffer, I had to give in and add one.  Then it worked fine.  Though for I2C, it must be bi-directional and needs to be one like the SparkFun BOB-12009 using the MOSFET transistors rather than the TXB0104 chip version, as the I2C pull-up resistors messes up the direction switching logic of the TXB0104 chip and won't work.  But the MOSFET version works great.But once again, I'm finding the I/O drive of the STM32F405 processor to be much inferior to that of other processors, like the ATmega328, which can interface that LCD (even with mixed voltages) without any level shifter.  So expect to have to deal with needing to buffer I/O lines and do voltage conversions -- even in situations where it shouldn't be needed -- to get other devices and shield boards to work with the Netduino.  While this is more a function of the STM32F405 processor itself and not specific to the NetduinoPlus2 board, this board fails to provide any on-board support to handle this.  And that would be nice for a board claiming compatibility with Arduino Shields.  I would drop it to 4 stars for this, but it's still a very nice higher-performance micro board for the buck.There are some voltage level shifter shields out there.  I haven't tried them, but maybe they would work as a generic bridge between this board and add-on shields to make things work better?  Though not sure if they would do well if you have mixed voltage devices -- as the FPGA I interfaced was 3.3v, and while it didn't need any voltage level shifting, it did need SPI I/O buffering.  So expect some interfacing headaches...Update 3: I've now had time to write my own SD Card driver and FAT FS interface layer for it.  And by the way, you aren't limited to a 2GB SD Card as the Netduino specs says -- that's merely a software limitation in their .net framework.  Not sure why they limited it there, but elm-chan.org has a wonderful open source FATFS library that works up to 2TB and easily interfaces with SD Cards, ATA drives, USB drives, etc.  Just provide it a low-level driver interface.  I presently have mine reading and writing 32GB SD Cards, but not without a few interfacing headaches along the way, which brings me to this update...The problem is that the MISO SPI input pin on this Netduino has a pull-down resistor instead of a pull-up resistor.  It has to have a resistor going one way or the other in order to satisfy the DFU bootloader and keep it from getting confused, as that pin is an alternate input for it.  BUT, the problem with the pull-down is that the SD Cards come up in SD-Mode with all of its I/Os in open-drain mode.  The idle state for the outputs is a '1' and during initialization, the SD card is expecting to pull it to ground to broadcast a '0'.The SD cards are free to output busy-bytes while its processing.  The start of a good message begins with the first transition to a '0'.  BUT, if your bus is pulled to ground, you can't see that!!  Now, once the SD card is initialized and configured for SPI mode, that output becomes push/pull and the SD Card can drive it.  But, as it is, it will cause you headaches with the initialization process.I was tempted to breakout my soldering iron and change it from a pull-down to a pull-up, but when I saw it was a 0201 size resistor and not wanting to have to do surgery on every future card I used, I decided to work around it in software instead.  The workaround is to send out the SD Card CMD00 twice.  On the first one, just cycle through enough SPI clocks as if you were really able to see and verify its results, but then toss it, and do it a second time.  The first one will switch the card to SPI mode and then the next time you issue the CMD00, you'll be able to see the results from the SD Card since it will be configured push/pull.  So, I don't fully understand why they chose a pull-down on that pin.  But once I figured that out, I was able to crank up the speed (init should be done at 400kHz) and talk with the card at 21 MHz with no problems.My next issue with this board is that the VBat power input is tied directly to VDD, with no diodes or jumpers or anything isolating them.  This means you cannot use the 4K battery-backed RAM option nor the Real Time Clock that this processor has, making those peripherals useless.  With a little surgery, you could lift pin 1 (VBat) and put a jumper wire over to your backup power circuit.  But, why couldn't they add something for that pin?  I can see not wanting to incur extra expense in a diode or a connector, but they at least could have put a solder jumper bridge and a through-hole solder pad to where you could connect something there.So --- given all of these interfacing headaches, a lack of VBat connection point, etc, I've bumped my review down to 4-stars.  It's still a great board and works really well with the newlib C-runtime and the libstdc++ packages.  It's nice being able to work with an embedded microcontroller with STL, stdio, a real heap with malloc/free, etc, and still have all of the low-level I/O abilities.  And with all of this, my code still hasn't broken over 100K yet!  I still have 900K of free flash!

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://guatemala.desertcart.com/products/2058191-netduino-plus-2](https://guatemala.desertcart.com/products/2058191-netduino-plus-2)

---

*Product available on Desertcart Guatemala*
*Store origin: GT*
*Last updated: 2026-02-23*